Specifications of EIZO T1721

EIZO T1721 43.2 cm (17") 1280 x 1024 pixels Touchscreen Grey-T1721-GY

EIZO

The FlexScan T1721 uses surface wave acoustic (SAW) technology which offers a long touch life of 50 million touches minimum. It responds to input from both a finger and gloved hand, and has minimal deviation compared to most other touch screen technologies to ensure that the touch point corresponds to the touch of the finger. Compatible operating systems are Windows XP (32-bit) and Vista (32-bit).

At startup or upon wakeup, an EIZO-patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

With both DVI-D and D-Sub mini 15-pin inputs, you can use a computer that has either a digital or an analog graphics board (or both if connected to two computers), and quickly switch between the inputs via a front panel button.

EIZO’s ArcSwing stand offers a curved range of motion with 104 mm of height adjustment and 65° tilt so you can position the screen at an angle to suit your work environment. The power supply is built in, so there is no separate power brick or cord. Compliance with VESA standards means the panel can be removed from the stand and placed on a movable arm or wall bracket.

Four preset viewing modes – Text, sRGB, Custom (user defined settings), and EyeCare. EyeCare lowers the screen’s brightness to just 3 cd/m2 and is ideal for work environments with little or no ambient lighting.

An Auto EcoView sensor on the front of the monitor measures ambient light and optimizes the screen's brightness to levels akin to viewing a sheet of paper under typical office lighting conditions. Since the screen is never too bright, eye strain is reduced while power consumption is cut by up to 40% compared to operating the monitor with Auto EcoView turned off and set to the default factory brightness of 100%.

Release date: 2010-05-08.